The Glock 19: A Staple within the Handgun World
The Glock 19. It is greater than only a firearm; it is an icon. Celebrated for its reliability, simplicity, and ease of use, it is grow to be a favourite amongst legislation enforcement, army personnel, and civilian shooters alike. However even essentially the most reliable firearms often require upkeep, upgrades, or customization. One frequent process that gun house owners typically undertake is eradicating the rear sight. Whether or not you are seeking to set up a brand new sight, restore a broken one, or just personalize your Glock 19, understanding find out how to take away the rear sight is a helpful ability.
Security Above All Else!
Earlier than we dive into the method, let’s make one factor crystal clear: security is paramount. Working with firearms calls for the utmost respect and adherence to security protocols. This information is for informational functions solely, and it doesn’t substitute for skilled gunsmithing providers. In the event you’re not totally comfy with this course of, it is at all times finest to hunt the assistance of a certified gunsmith.
Clearing Your Glock 19: The First and Most Important Step
Essentially the most essential security precaution is guaranteeing your Glock 19 is totally unloaded. Comply with these steps meticulously:
- Take away the Journal: Press the journal launch button and firmly take away the journal from the grip.
- Visible Inspection: Level the firearm in a protected path, guaranteeing the muzzle is away from any folks or objects. Then, pull again the slide and visually examine the chamber. Be certain that there is not any cartridge current.
- Bodily Inspection: After the visible inspection, carry out a bodily verify by inserting a finger or cleansing rod into the chamber to verify it is empty.
- Verify Empty: Lock the slide to the rear (sometimes utilizing the slide lock lever) to be completely certain the chamber is obvious.
Vital Reminder: All the time deal with each firearm as if it is loaded, even after performing these checks. By no means level the muzzle at something you are not keen to destroy.
Security Gear for Your Eyes and Arms
All the time put on acceptable security glasses to guard your eyes from any potential particles that might fly off. Gloves can even defend your fingers, however guarantee they do not hinder your grip on instruments.
Important Instruments and Supplies
Now that we have established security, let’s collect the mandatory instruments and supplies. Having the suitable gear is essential for a easy and profitable rear sight removing.
- The Glock 19 (Unloaded and Protected): That is the firearm you are engaged on, so guarantee it is correctly cleared, as beforehand mentioned.
- A Sight Pusher Device: That is the perfect instrument for the job, fingers down. A sight pusher is particularly designed to take away and set up sights with out damaging your slide or sight. There are lots of totally different fashions, however the fundamental precept stays the identical. You mount the slide, align the pusher with the rear sight, and apply stress to drive it out.
- A Brass or Nylon Punch: If you do not have a sight pusher, a brass or nylon punch is your subsequent most suitable choice. These punches are softer than metal, in order that they’re much less more likely to scratch or injury your slide.
- A Small Hammer: If utilizing a punch, you will want a small hammer to softly faucet the punch and drive the sight out.
- A Bench Block or Padded Floor: That is important for supporting the slide and stopping injury. A bench block is a devoted instrument with grooves and cutouts designed to carry a slide securely. A padded floor, like a bit of wooden coated with a gentle fabric, may also work.
- Elective: Gunsmith Screwdriver or Small Choose: These might be useful for eradicating the extractor from the slide if it interferes with the sight removing course of.
- Elective: Lubricant (Gun Oil): Generally, sights might be cussed. A small quantity of gun oil can assist to loosen the sight earlier than you try to take away it.
Getting Prepared: Preparation for the Elimination
Earlier than you start, put together your workspace. Ensure you have sufficient lighting and a clear, uncluttered space. Manage your instruments and supplies in order that they’re simply accessible. Now, let’s proceed with the removing course of.
The Sight Pusher Technique: A Exact Strategy
Utilizing a sight pusher is mostly the best and most dependable technique. Here is find out how to do it:
- Safe the Slide: Mount the unloaded Glock 19 slide within the sight pusher in response to the producer’s directions. Most sight pushers have adjustable jaws or clamps that safe the slide firmly with out inflicting injury. Make sure the slide is oriented within the pusher in order that the rear sight is dealing with the path the pusher will transfer it.
- Align the Pusher: Fastidiously align the pusher’s contact level with the aspect of the rear sight. The aim is to use even stress on to the sight, driving it out of the dovetail. Double-check that the whole lot is aligned.
- Apply Stress: Slowly and steadily tighten the sight pusher. As you flip the deal with or mechanism, the pusher will apply stress to the sight. Don’t drive it too shortly. Be affected person.
- Loosen if Obligatory: If the sight is tightly seated, a small quantity of lubricant (like gun oil) can generally assist. Apply a drop or two to the dovetail the place the sight sits. You may additionally must barely loosen the sight pusher and re-align it.
- Proceed Pushing: Because the sight begins to maneuver, proceed turning the deal with or mechanism. Monitor the progress carefully. The sight ought to steadily transfer out of the dovetail.
- Look ahead to Obstacles: Generally, the extractor (the half that pulls the spent casing from the chamber) can intervene with the sight removing. If this occurs, you may must take away the extractor first. Seek the advice of your Glock 19 handbook, or analysis on-line for directions on eradicating the extractor.
- Elimination Full: As soon as the sight is totally pushed out of the dovetail, rigorously take away the slide from the sight pusher. You have efficiently eliminated the rear sight in your Glock 19!
Various Technique: Utilizing a Punch and Hammer
If you do not have a sight pusher, a punch and hammer can work, nevertheless it requires extra care and precision.
- Safe the Slide: Place the slide on a bench block or a padded floor. Make sure the dovetail the place the rear sight sits is oriented in a method that you may drive the sight out from the aspect. Bear in mind: sights are often put in from left to proper, when trying down the slide.
- Place the Punch: Place the brass or nylon punch towards the aspect of the rear sight. Place the punch as shut as potential to the bottom of the sight, the place it contacts the slide.
- Tapping the Sight: Gently faucet the punch together with your small hammer. Use managed, deliberate strikes. Keep away from utilizing extreme drive, as this may injury the slide or sight.
- Inch by Inch: With every faucet, the sight ought to begin to transfer. Monitor the progress and modify the place of the punch as wanted. Work your method throughout the sight little by little.
- Persistence is Key: If the sight would not transfer simply, think about making use of some gun oil to the dovetail.
- Hold Going: Proceed tapping and pushing till the sight is totally eliminated.
- Impediment Issues: As with the sight pusher technique, the extractor can generally trigger a difficulty. Refer again to any of the earlier steps concerning the extractor.
- Job Performed: As soon as the sight is eliminated, congratulations! You have efficiently eliminated your Glock 19 rear sight utilizing this technique.
Publish-Elimination Steps: Cleansing and Inspection
Now that the rear sight is eliminated, it is important to examine the slide and clear the dovetail.
- Examine the Dovetail: Fastidiously look at the dovetail the place the sight was positioned. Search for any injury, burrs, or imperfections. Take away any rust or particles.
- Cleansing the Dovetail: Clear the dovetail with an appropriate gun cleaner. Take away any dust, particles, or previous lubricant.
- Elective Lubrication: In the event you plan to put in a brand new sight, you possibly can apply a small quantity of gun oil or lubricant to the dovetail. This can assist the brand new sight slide in additional simply.
What About Putting in the New Sight?
Putting in the brand new rear sight is the same course of to removing, solely in reverse. The identical instruments and strategies apply. It is important to get the alignment proper. When you have the suitable instrument, get the sight pusher instrument. In any other case, use the hammer and punch approach.
Addressing Points and Issues
Generally, issues do not go as deliberate. Listed here are some frequent troubleshooting suggestions:
- If the Sight Refuses to Budge: Double-check the alignment of your sight pusher or punch. Make sure you’re making use of stress within the appropriate path. If the sight continues to be caught, strive making use of extra stress (with the pusher) or tapping extra firmly (with the punch). You may want to make use of a penetrating oil.
- Broken Sight: In the event you by chance injury the sight throughout removing, it’s time to exchange it.
- Search Skilled Assist: In the event you’re struggling or not sure about any step, it is at all times higher to seek the advice of with a certified gunsmith.
Wrapping Up: The Path Ahead
Eradicating the rear sight in your Glock 19 is a manageable process with the suitable instruments, info, and a dedication to security. Bear in mind to at all times prioritize security, take your time, and by no means drive any step of the method.
Now that you know the way to take away the rear sight in your Glock 19, you might be properly in your technique to personalizing and upgrading your firearm! From putting in new sights to enhancing accuracy or bettering the aesthetics, the chances are countless. All the time do your analysis and seek the advice of with a certified gunsmith to ensure your satisfaction.
